Material Selection Of Aluminum Stage Truss

Is the aluminum stage truss on the stage made of tempered glass or laminated glass? How thick is it? Let's talk about the material characteristics of common stage trusses to facilitate your choice.

1) Tempered glass

Tempered glass, also known as tempered glass, is a glass obtained by heating ordinary glass to a softening point and quenching it. Its surface has strong and uniform compressive stress and its mechanical strength is doubled. Compared with ordinary glass of the same thickness, the resistance of tempered glass is Bending and impact resistance is three to five times higher, and resistance to sudden temperature changes is three times higher. Tempered glass has good safety and is granular after being broken, thereby avoiding possible harm to the human body.

It is widely used in high-rise building curtain walls, indoor glass partitions, elevator handrails and other occasions requiring safety.

The characteristics of using tempered glass stage truss:

The glass is broken into small, obtuse-angle particles similar to honeycomb, which will not cause major harm to the human body. Bending strength: The bending strength of tempered glass is generally 3-5 times that of ordinary glass.

2) Laminated glass

The double-layer glass has a special glue in the middle. The tempering safety factor of this method is higher than that of ordinary tempered glass.

After it is broken, no rafters will fall but the whole piece will be bonded together, which is very safe. The price is slightly higher than the ordinary tempered glass of the same thickness. Hangzhou Baiming Stage Glass Stage chooses high-quality and safe glass manufacturers to cooperate. The characteristics of this stage truss are:

Good weather resistance, acid and alkali resistance, will not cause yellowing and hydrolysis due to sun and rain over the years.

Long life, compared with other materials, it has a longer life than three years;

Good light transmission, up to 92%, the required light intensity is small, saving electricity;

Strong impact resistance, sixteen times that of ordinary glass, suitable for installation in areas where safety is particularly needed;

Excellent insulation performance, suitable for various electrical equipment;

Light weight, half lighter than ordinary glass, less load on buildings and supports;

Colorful and high brightness, which cannot be compared with other materials;

Strong plasticity, large change in shape, easy processing and forming; high recyclability, recognized by the increasing awareness of environmental protection.